- MAC MINI MID 2010 HARD DRIVE WHICH ONE IS PRIMARY DRIVE PRO
- MAC MINI MID 2010 HARD DRIVE WHICH ONE IS PRIMARY DRIVE PLUS
- MAC MINI MID 2010 HARD DRIVE WHICH ONE IS PRIMARY DRIVE MAC
USB 3: HDD: 3 minutes 56 seconds SSD: 1 minute 10 seconds +/- 3 seconds. The drive didn't matter nor the dock if I was using a USB 2 cable. USB 2: transfer time 9 minutes =/- 4 seconds. The conclusions were few and explanations simple. I ran 12 tests but I'll spare you the blow-by-blow. I used 3 docks, the USB 3 I referred to earlier, an 9 year old eSATA/USB 2 and a new USB3/USB-C I got last week - I needed another anyway and was curious to see if USB-C made a difference. Even if they still worked, all had serious SMART errors. Out of the hundreds I've replaced, not one OE HDD from a late 2009–2012 has ever tested good. I used the same 25.57GB test file and two drives: a 2TB Crucial MX300 SSD and a 10 year old WD Black 500GB 7200 rpm system pull from an early 2009 iMac 24".
MAC MINI MID 2010 HARD DRIVE WHICH ONE IS PRIMARY DRIVE PRO
I was planning to test USB 3 vs USB-C on my iMac Pro today but my 2010 is still on the desk so it was very easy to add USB 2.
I can only assume that you've not done much of that lately-but why would you unless you don't have a 2012 or later Mac? Yes, it takes awhile but Firewire isn't much faster - really, I have old FW 800/USB 2 housings still and have timed it.Įnough of opinions. They have new SSD's and hard drives of numerous kinds and sizes ready for new installations using self-powered docks.Ĭlick to expand.Longer than USB 3 which isn't an option here, yes but extremely long? Nonsense. They introduced me to the USB docks we have been talking about, years ago.
MAC MINI MID 2010 HARD DRIVE WHICH ONE IS PRIMARY DRIVE MAC
The SSD makes it quite fast, just a very few seconds on start-ups, and also saving large photos to folders in the desktop, or to external hard drives.īy the way, a couple of friends of mine make a living repairing computers and their respective OS's, both Mac and PC. Have been using this iMac for photo-editing since 2011.
MAC MINI MID 2010 HARD DRIVE WHICH ONE IS PRIMARY DRIVE PLUS
Then I opened the iMac, removed the hard drive, mounted the SSD on a bracket, installed the SSD plus the new temperature sensor kit, installed the screen, and powered the iMac. I made sure that the clone was fine by starting the iMac from it and then using CS6 and other apps. The next step was to clone the hard drive to the new and freshly formatted SSD plugged externally to the iMac's USB port. I also had a screen removal (rubber plungers or cups?) kit, screw drivers, and a hard drive temperature sensor kit.īefore removing the hard drive I removed all the unnecessary files, folders, and so on, cleared the trashcan, and then checked the drive with Disk Utility to make sure everything was fine with it. I replaced the hard drive of a 2011 iMac with a 1TB SSD. Migrated a little less than 1TB of files and apps from the external Seagate hard drive to the 2TB fusion drive in the new iMac in a tad over two hours. I used one of these docks to migrate all my files and apps from the 2011 to my new iMac. One of the two incorporates a cooling fan.
Click to expand.I have similar docks, but the lay down type.
0 kommentar(er)
